Teenage bed with sides

Baby cots are aimed at healthy sleep and child safety. Bumpers are one of the components of safety. They hold the child, are an obstacle to the constantly slipping blankets and pillows. On such beds, the mattress is firmly held in place and does not slip down.

The sides can be different in appearance and materials - metal, fabric, wood and plastic. The location of the rim is also important.

• One side - such a side protects from falling, but you can only put such a bed in one position, because there is no second side.
• In the middle - The side may be in the form of a small fence and covers only the middle of the bed.
• Corner - here the side can be shaped as an angle on each side of the bed, it is less secure, but for older children it is a good option.
• At the head - the side is made to half the bed, this is often enough for good retention.
• Embedded - the side makes a single whole with a cloth of a bed.
• Removable - are good because they can be removed if necessary or even moved to another part of the child’s bed.
• Soft - the sides in such a bed have a soft filler that perfectly protects against injuries.
• Fabric - represent a dense fabric on a wooden or metal frame. Despite the seeming fragility well hold. Minus - marcos, but modern fabrics allow for wet cleaning.
• Adjustable - perform the role of a transformer, and depending on the age of the child allow you to adjust the height and width of the board.

Today teenage bed with sides not only a sleeping place, but also a good functional version of furniture for storing things, games and child’s activities.

The bed can be with drawers and cameras for storing both warm blankets, and clothes, and baby toys. Any arrangement of boxes is under the bed, on the side, as a pedestal, with the letter “P”, above the bed.

A bed with soft sides can also be used for the creativity of the child, from the outside it is possible to fasten to them drawings, patch pockets for books and toys.

Another variation - loft bed. Universal corner for the child. There you can sleep, play and practice. The bed can be equipped with additional lighting, which can be used as a night light, adjusting the brightness.

The first thing to consider when choosing - the material from which it is made. It is better if it is a natural tree - pine, oak, birch. The coating must be safe and environmentally friendly. If the bed is a specific smell of paint or varnish, then it is better to refuse. Metal furniture for children's bed also not the best option, because it is cold and not the most comfortable. When buying, it is better to ask for a quality certificate for such an important piece of furniture.

Next, examine the base and pallet cots. The main thing is hardness. If the material bends, it can harm the health of the child. The crate should also be made from natural materials. The pallet is better to choose ventilated, rack.The height of the pallet can be adjustable, then the sides are suitable for any age of the child. It is better to choose an orthopedic mattress for children, at least 6 cm high, it will be comfortable to sleep on it.

The length of the bed should be 20 centimeters more than the height of the child. With such sizes the baby will feel free in bed. Width is 70-80 cm. The bed can be wider if space allows, but remember that for a small child a large space can be cold and frightening.

The height of the rim depends on the age of the child. The younger, the higher should be the side, because even if the child rises in the morning at the edge, it can fall out and get injured. For older children, the height of the side is reduced. Teenager, you can choose a 10-15-inch rim. Too high a side can also interfere with, closing the view of the child and access to fresh air.

For kids, the side is better to choose soft. There is an option when a soft cloth or pads are attached to the side. The fabric should be natural, without odors. When fabric and soft sides should be remembered that they quickly collect dust and dust, so these sides must be removable for quick cleaning.

If the rim is made in the form of a fence or rods, then the gaps between them should correspond to the size of the child, the recommended gaps from 4 to 6 centimeters, otherwise he may get stuck between them, stick his head or hands.

The color of the bed must be in harmony with the interior of the child’s room, this will shape his taste and psychological state when in the room. Best of all neutral colors or calm matte colors. Bright coloring can provoke an increased excitability of the child and unwillingness to go to sleep, especially in the daytime.

A wide selection of cots in the form of vehicles and toys - cars, boats, clouds, carriages. Do not forget about beauty. Your goal is the right bed.

The main thing when choosing is the comfort and safety of your child. It is better to choose a bed together, so you will know exactly what he wants and correct his choice according to health and exclusion of injuries.

Bed with a side for children - this is a great solution! But what if at this stage there is no opportunity to buy a children's bed? There is a way out, and for this we propose to watch the following video, where the master will show us how to make a side with his own hands.